Skip to content
  • Telephone 0845 155 0042
  • Mobile: 07540051192
  • Send Email

Removal of sectional overhead door and installation of electrically operated roller shutter

After previously completing a site survey, our engineers went to the site, created a safe working area and then stripped out and removed the existing electrically operated sectional overhead door. From here they installed one of our industrial roller shutter doors to utilise the mezzanine floor space they had created. Some tests were performed before our team of engineers left to make sure that everything was in good working order.

There were two options for the industrial roller shutter door and they were:

Option 1:

Standard industrial 3 Phase door
Curtain: 20 gauge galvanised steel
Bottom Slat: 'T' Bottom Rail
Guide Rail: 65mm 'U' Channel
Operation: GFA Safedrive motor with digital limits as standard.  Low level hand chain for manual override facility and integral safety brake included as standard. Arrangement:  Face fix arrangement for guide and end plate angles
Finish:  Galvanised as standard

Option 2:

Insulated industrial 3 Phase door
Curtain: Double walled foam filled 77mm galvanised steel slat.
Bottom Slat: Aluminium extruded bottom slat profile with rubber seal as standard
Guide Rails:  95mm extruded aluminium guide rail fitted with brush seal guide inserts
Motor: GFA Safedrive motor with digital limits as standard.  Low level hand chain for manual override facility and integral safety brake included as standard. Arrangement:  Face fix arrangement for guide and end plate angles
Finish:  Galvanised finish as standard

Industrial roller door being prepared for installation

 
Industrial roller shutter door
Open industrial door
Top